Q: How do I use the flash-to-pass feature?

asked by on

How do I use the flash-to-pass feature?

The flash-to-pass feature lets you briefly turn on the high-beams. To use this feature, pull the turn signal lever (which protrudes from the left side of the steering column) towards you, then immediately release.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the flash-to-pass feature?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the Service Traction Control message mean?

The Service Traction Control message can appear in the driver information center (DIC). When the DIC displays this alert, there is an issue with the traction control system (TCS), and your vehicle needs to be serviced. After the TCS issue...

Q: 2010 Mercedes-Benz S400 Hybrid

Hello. It sounds like the car has low battery voltage. Either the battery has gone bad or the alternator is not charging properly and is draining the battery. I would suggest that you have the electrical system inspected. If you...

Q: the lights on my dash board do not work and my gas gauge always says its empty with the gas light on even though i fill up my tank

Hi. It sounds like your instrument panel cluster or IPC needs to be rebuilt or replaced. Over time, the bulbs eventually burn out as do the bulbs in your lights at home. The gauge's movement is controlled by an electronic...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.