Q: Q: How do I use the emergency trunk release?

asked by on

How do I use the emergency trunk release?

The emergency trunk release is a system that allows a person to escape from the vehicle if they are trapped in the trunk. The trunk release is a plastic handle that hangs down from the inside of the trunk. To use the emergency trunk release, pull on this handle and push the trunk open.

Tip

The emergency trunk release can also be used if you are trapped in the vehicle cabin and the doors are not opening. Access the trunk by folding down the rear seats, and exit the vehicle through the trunk.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I use the emergency trunk release?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the StabiliTrak Off message mean?

The StabiliTrak Off message will appear in the driver information center (DIC) when the StabiliTrak system is turned off. When the system is turned on again, the DIC alert will turn off.

Q: How do I start the car if I have keyless ignition and the transmitter battery is low?

The keyless ignition system allows you to turn on your vehicle without a key, simply by using the remote keyless entry (RKE) transmitter. If the transmitter battery is dying, however, the keyless ignition system will not operate normally. When this...

Q: How do you dim or brighten the interior lights?

Your car is equipped with adjustable interior lights to provide better visibility during different driving conditions. They automatically turn on when you turn on the headlights, but you can manually control their brightness with the panel dimmer control. Here’s how:...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.