Q: How do I use the cargo tie-down?

asked by on

How do I use the cargo tie-down?

The cargo tie-down is located in the trunk, on the driver side. The tie-down is a small hook that protrudes from the side of the trunk. Hang light items on this hook to keep them from rolling or moving around in the trunk while you are driving.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the cargo tie-down?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What is the maximum weight that my vehicle can carry?

You should never exceed the maximum weight recommended for your vehicle, or else your car may not be able to operate properly. The maximum weight that your car can carry is listed on the Tire Label, which is on the...

Q: Transaxle makes a loud grinding noise when you accelerate

Of course, first check the fluid level to be sure it is not low but if you are already hearing significant noise, there is probably mechanical damage that will have to be repaired. The problem has to be evaluated during...

Q: I have a 2012 chevy cruze my and I have a code that popped up p0171 for system lean bank 1 what could it ?

A number of things may cause code P0171 to be triggered. As the code indicates, this means there is a lean fuel condition which may be caused by a lack of fuel supply or in some cases, a vacuum leak....

Related articles

What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.