Q: How do I use the automatic windows?

asked by on

How do I use the automatic windows?

The front windows have automatic features, that allow you to fully roll down or roll up the windows, with just one press of the Power Window switch. To automatically roll down the window, press the Power Window switch down all the way, and immediately release. To automatically roll up the window, pull the Power Window switch up all the way, and immediately release. Press or pull the switch again to stop the progress. Tips The power windows will work for 45 seconds after turning the vehicle off, unless you open a door first.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the automatic windows?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I changed the battery and alternator but for some reason the battery isn't charging what could be the issue

Check the fuse 65 in the main engine fuse box, it is a 7.5 amp fuse. Then check the main fuse A, a 120amp fuse. If both of these fuses are good then you will have to check them for...

Q: How do the active head restraints work in a 2012 Nissan Altima?

Active head restraints are provided only in the front two seats, and only on some Altimas (it depends on the trim level). If your car is equipped with these, they provide additional safety in the event of an accident. They...

Q: When replacing rear brake pads on 2012 nissan rogue is it necessary to replace rotors at the same time?

Whenever brake pads are replaced the brake rotors must be resurfaced on a brake lathe or replaced outright. Putting new pads on a worn rotor is a guarantee that the new pads will wear irregularly, you will have vibration, and...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...