Q: How do I use hill start assist?

asked by on

How do I use hill start assist?

Your truck is equipped with Hill Start Assist. Hill Start Assist keeps your vehicle from moving when stopped on a hill. To use Hill Start Assist.

  1. Keep the brake pedal pressed to activate Hill Start Assist.

  2. Hill Start Assist will keep the vehicle from rolling while you move your foot from brake to gas.

  3. Drive off normally.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use hill start assist?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: The clutch went out and clutch fluid leaking out.

Check the slave cylinder under the vehicle and see if the seal blew out. Fill up the clutch master cylinder if its low and pump the clutch pedal a couple of times and then look for the leak. Pull back...

Q: How do I change the trip meter item to display?

The multi-information display will show you the average fuel economy, as well as another trip meter item. To choose which item you would like displayed alongside average fuel economy, follow these steps: 1. Turn the ignition to On, while making...

Q: Water leak, don't know where

If your engine has no external coolant leaks, and is still requiring you to put water in the radiator, that water is leaking internally inside the engine. But before jumping to that conclusion, a cooling system pressure test should be...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...