Q: How do I toggle between the day and night display?

asked by on

How do I toggle between the day and night display?

The display has a different brightness setting for daytime than for nighttime. To change the brightness of the display, press the Brightness Control button, then use the display system within five seconds.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I toggle between the day and night display?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I replace a remote keyless entry (RKE) transmitter?

If you want a new remote keyless entry (RKE) transmitter, you will need to purchase one at a dealership. If the new RKE transmitter is replacing a lost transmitter, the entire RKE system will need to be reprogrammed for all...

Q: 07 xterra cranks but wont always start. sometimes starts and shuts off immediately. sometimes just cranks and cranks

The best way to diagnose a problem like this is to play with certain components and attempt to replicate the issue. Components that could be causing these symptoms are the fuel pump, fuel filter, a number of solenoids and sensors,...

Q: What does the Battery Saver Active message mean?

The Battery Saver Active message can appear on your driver information center (DIC). When the DIC displays this alert, that means that your battery has a low charge, and your vehicle is shutting off certain systems that may drain the...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...