Q: How do I tilt the moonroof?

asked by on

How do I tilt the moonroof?

The moonroof can be tilted to let in a little bit of fresh air. To tilt the moonroof, press the center of the power moonroof switch (located next to the moonroof). Press the center of the switch a second time to close the moonroof.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I tilt the moonroof?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My rear tire on the driver side feel hot?

Hello there, thank you for asking about your 2005 Honda CR-V. It is normal for tires to get a little warm after driving on the highway. If one tire is warmer than the others, then first check to make sure...

Q: Flashing green light next to "D" and check engine light on.

For this particular issue, I would start by checking the continuity of the cruise control switch buttons. You will need to check these with a volt meter to determine if they are getting power. If you need assistance with getting...

Q: Q: Sunroof is not closing

Hello, if you don't hear the motor even try to work, you may want to check the fuses. If you hear the motor and it moves in small increments, you may want to try closing the sunroof by activating the...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...