Q: How do I shift out of P (Park)?

asked by on January 04, 2016

How do I shift out of P (Park)?

You need to shift out of P (Park) and into a gear in order to start driving. Here’s how: 1. Turn on the vehicle. 2. Apply the brakes fully. 3. Press the button on the shift lever and hold it down. 4. Move the shifter into gear. 5. Release the button

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

What does it mean if the “Service power steering” warning is displayed in the message center?

Your car’s Power Steering system is an integral part of the vehicle. While the system can fail and you’ll still have the ability to steer, you’ll find that the wheel is much harder to turn. Obviously, it’s important to have...

Why my infotainment automatically turns off every 10 minutes even while driving?

I believe this issue would be related to the control unit itself or your settings inside the unit. Although unlikely, it is possible that there is a setting that makes the radio turn off at specified intervals that you can...

Flex pipe leak

The flex pipe broke due to the motor mounts are bad and mounts should be repaired first and then an exhaust shop should be able to just replace the flex pipe for you.

Transmission won't go into gear - 1997 Pontiac Grand Am

Hi there. Unfortunately, performing a transmission flush can create more problems for the transmission than it helps, especially with higher mileage. The debris gets stirred up and travels throughout the transmission. A transmission service should involve dropping the transmission pan,...

2001 Chevy s-10 truck that won't start. Lights come on but when I turn the ignition there is no noise ( grinding, clicking )

Hello, thank you for writing in. The vehicle depends on two main components for starting. Considering the starter motor is not functioning at all, you either do not have power going to it, or the motor has failed and is...

Clutch going to floor

I would check the fluid level on the clutch master cylinder first. If it is low, I would add DOT 3 clutch fluid, then pump the pedal several times to bring it up. If you are low on fluid, you...

Any tips on how to get the shaft out of transmission.

Hello, thank you for writing in. There are a few things you can try. The most commonly utilized options includes larger and longer tools for more leverage. If you are attempting to save the axle you are removing, you will...

My car wont start after driving it for an hour, it will just crank and then start after 30 mins

The engine is very common to have an intermittent cam or crankshaft sensor. You can have the computer scanned for codes to one of the sensors and replace them as codes are stored. If you have codes for both then...

Where are the fuses for a 2005 Astro van

Hi there. The fuse box on a 2005 Chevrolet Astro van is located under the hood, near the back of the engine, on the driver side. It's contained inside a "black box" that has a few clips on the box...

Related articles

Symptoms of a Bad or Failing Transmission Speed Sensor
Common signs include harsh or improper shifting, cruise control not working, and the Check Engine Light coming on.
5 Essential Things to Know About Potholes
If you drive through a pothole it can damage your car. Never speed through potholes, and check for suspension damage if you hit a pothole on the road.
A Buyer’s Guide to the 2012 Ford Focus
The The 2012 Ford Focus brings a lot to the world of compact cars. Available as either a four-door sedan or a five-door hatchback, the Focus has great fuel efficiency and European styling that sets it apart from other cars...