Q: How do I select a phone?

You should always inflate your tires to the to the proper pressure. This will increase the life of your tires, and the safety of your vehicle. The proper inflation pressure can be found on the tire and loading information label,...

Hi there. This can be caused by a number of things. Since the dealership installed a scan tool and didn't see any codes then it must not be a sensor failure. I typically start by checking the back pressure of...

A missing AC belt can certainly be the reason the AC is not working. The compressor needs to be spinning for the system to provide cold air. With no belt to connect the compressor to the engine, no cold air....

Hello. If your engine is backfiring (https://www.yourmechanic.com/services/engine-is-backfiring-inspection) and you smell gasoline then it is likely that your vehicle is running rich. Backfires can be caused by both rich and lean conditions, however a fuel smell is usually associated with a...

Check for proper fuel pressure - both while the vehicle is running, and after running. I suspect you will find that fuel pressure is not being maintained in the pressurized portion of the system due to a fuel pressure regulator...

Hi, thanks for writing in. In order to bleed a slave cylinder properly, it should be bench bleed just like a master cylinder. The best way to do this is to secure the slave cylinder into a voice connect plastic...

Hello. If the lower radiator hose (https://www.yourmechanic.com/services/radiator-hose-replacement) needs to be replaced, I would take care of it as soon as possible, as a bad radiator hose may render the vehicle undrivable if it is leaking coolant. If left unattended, a...

Hi there. Typically the Chevrolet unique code of C0040 is an indicator of an ABS sensor or module problem. You might want to review this video (https://www.youtube.com/watch?v=nachBPzhbvY) on how many mechanics diagnose the source of this issue and resolve it...

Hi there. The air conditioning system can have many things that could contribute to a heat cycle condition. Check the following conditions to find the source of heating issue: Check The condenser for any dirt or plugged up vent fins...