Q: How do I reset the power inverter?

asked by on

How do I reset the power inverter?

The power inverter has overload protection to keep it from being damaged. When the maximum power is exceeded, the inverter will shut off. To reset the inverter, simply press the power inverter button to turn it off, then press it again to turn it back on.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I reset the power inverter?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I use the seat belt with the detachable anchor?

The rear seat belt may have a detachable anchor to help improve safety. Here’s how to use it: 1. Remove both the small latch plate, and the standard latch plate from the slot in the ceiling. 2. Buckle the small...

Q: Where are the jack and the emergency tools located?

All of the emergency tools, and the jack, are located under the front passenger seat. To access the emergency tools, use your hands to remove the plastic cover at the base of the passenger seat. Then, pull out the jack...

Q: How to replace an ignition cylinder? do I also have to replace ignition switch? cause key has a chip that's specific my dodge.

In some cases i have seen the outer ignition housing okay and just the key lock cylinder damaged. In others they damage the housing and ignition lock cylinder. In either case you cannot use your key; it will be a...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.