Q: How do I quickly defrost the windshield?
How do I quickly defrost the windshield?
YourMechanic
If you need to defrost the windshield in a hurry, you can do so. Simply turn the Air Flow Control dial to Defroster, turn the Fan Speed Control dial to maximum, and turn the Temperature Control dial to hot. When the windshield has defrosted, return the dials to a less extreme setting.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How does the ventilation system work?
Sometimes you don’t want the heat or the air on in the car. The ventilation system is designed to circulate fresh air from outside the car into the cabin. To use this system, follow these steps: Turn the temperature control...
Headlights caught on fire
There have been many issues in the past with the TSX having headlights catch fire. This particular model does not have a recall. It is important only to use recommended lightbulbs for this car. The manufacturer recommends 60w halogen bulbs,...
Car overheated while idling. What is wrong
There are a few faults that will cause your 2013 Hyundai Elantra to overheat when idling. The most common would be the electric fans not functioning. When air is flowing over the radiator the car works fine, but when the...
My dome light doesn't work - how can I diagnose/replace?
Hello, thank you for asking about your 2005 Nissan Altima. The body control module controls turning on the lights and supplies power to the lights' power saver mode. The body control module would need to be scanned and seek data...
Transmission slips off line under mid-full throttle
Hello there, thank you for asking about your 1998 Oldsmobile LSS. The first thing to have checked in a situation like this is the transmission fluid level. Using the directions laid out in the owner's manual, inspect the transmission fluid...
Rear end noise when going over bumps
You will need to replace the rear stabilizer bar, bushings and brackets using a new design part number from Mazda using kit part number B3Y0-28--10X. This is a new design that will fix the noise you are having. The part...
Locked out of my car
Hey there. In order to use the keypad on the side of your Ford product, you will need to know the five digit code that corresponds to your vehicle. There is a sticker hidden somewhere in your vehicle that tells...
I may have put the wrong type oil in my car?
Your engine does not show in the manual that it is required to use only full synthetic oil. You can use the synthetic blend or conventional type oils as long as you use the correct weight oil that is recommended...
Crankshaft position sensor
If prior to the work, no diagnostic trouble code was set (i.e., check engine light was not on) identifying a fault with the crankshaft position sensor, then the likelihood is they caused the problem. In any event, once the "cause"...
Related articles
2012 Nissan Altima vs. 2012 Volkswagen Passat: Which One Should I Buy?
Sedans are a special class of vehicle: created to provide a comfortable and often luxurious ride to those who have passed beyond the need to stick to the compact class. These slightly larger vehicles offer options the compacts and subcompacts...
Windshield Laws in Massachusetts
Massachusetts Massachusetts motorists are required to follow a variety of traffic laws when driving on the roads and highways throughout the state. However, in addition to those road rules, drivers must also ensure that the windshield on their vehicle is...
How to Replace a Windshield Wiper Blade
Car windshield wiper blades need to be replaced if you see streaks or hear scraping. Keep wiper blades in good condition to maintain good visibility.
Browse other content
Services
Cities