Q: How do I open and close the power moon roof?

asked by on

How do I open and close the power moon roof?

The power moon roof provides open air and light into your vehicle through the ceiling. To open the moon roof, press and release the Slide button on the moon roof controls. This will automatically open the moon roof most of the way, to the optimal setting. To open the moon roof all of the way, press the button again. Pull down on the Slide button and release to close the window. Tip If the sunscreen is closed, it will automatically open when the moon roof is opened.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I open and close the power moon roof?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My car has trouble code P0745, do I need to replace the solenoid?

Diagnostic Trouble Code P0745 refers to out of range voltage at a solenoid-operated valve that regulates hydraulic pressure in the transmission based on outputs from the Transmission Control Module (TCM). Code P0745 is set when the TCM sees an out...

Q: Sunroof not closing

Hi. I would reset the sunroof by pressing the forward button for the sunroof for about 10 seconds. If it still does not shut, you may need to have the sunroof replaced or the switch replaced. If you need further...

Q: Where is the center console storage?

The center console storage unit offers extra storage in the car’s cabin. The center console storage unit is located in the center console, directly between the two front seats. To open the center console storage, pull the lever on the...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.