Q: How do I lock the doors with the remote entry system?

asked by on

How do I lock the doors with the remote entry system?

You can lock your vehicle from outside of the car with the remote entry system. To do so, press the Lock button on the remote entry transmitter. The turn signals will flash to confirm this action. Press the button a second time within three seconds to receive audio confirmation that the doors are locked, as this will cause the horn to honk.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I lock the doors with the remote entry system?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Won't start, turn over. 1996 BMW 328is

The electronic immobilizer module completes the circuit to the starter once it has determined all of the parameters are correct. There is no stand alone relay, as it is built into the immobilizer module. If you are not getting power...

Q: I have a ford Explorer 2002 it does not go when I put it drive now it will not go at all.

Unless there is an engine management fault (total loss of power), your issue has to do with the transmission. Check to be sure there is adequate transmission fluid as a low level can cause malfunctions. The possible causes of failure...

Q: Driver side door lock button not working, and passenger side sliding door makes a buzzing noise

Hi there. These door issues are common on this vehicle. Most of the time the main issue is the master door lock switch on the driver door. It sounds like you already replaced that. As for the sliding door problem,...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...