Q: Q: How do I lock the doors with the key?

asked by on

How do I lock the doors with the key?

Locking your car doors with your key is very easy. Simply insert the key into the key hole on the driver’s door, and turn the key counterclockwise until you hear the doors lock. This will lock all of the doors, as well as the trunk.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I lock the doors with the key?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What is causing my front driver side tire to smoke?

It sounds like the left front brake was stuck in the applied position. The constant friction overheated the brake pads and they started smoking. Heating up may have caused the brake fluid temperature to reach it's boiling point. Even though...

Q: What precautions should I follow when using the Intelligent Key?

Your car’s Intelligent Key is a key, a receiver and a transmitter. It functions as a remote to lock and unlock your doors, but it also ties into the car’s immobilizer system. Without it, you can’t go very far. It...

Q: Can running the blowers for the AC with the engine off drain the battery?

The problem is although the current draw over 45 minutes might be "low", your battery might be weak, meaning it could have a bad cell and a low reserve capacity. It doesn't take much to "drain" a weak battery. A...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...