Q: How do I lock the doors?

asked by on

How do I lock the doors?

To protect your truck, the doors may be locked. This not only protects your vehicle, but your belongings as well. To lock the doors.

  1. Locate the power door lock Switch on the door of your vehicle.

  2. Press the left side to unlock all of the doors.

  3. Press the right side to lock all of the doors.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I lock the doors?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Belts making noise.

Hi there. A noise from the belts can be very annoying. If it is a very high pitched noise then you may have an issue with a loose or worn out belt or a bearing failure in one of the...

Q: When and how should you check the air pressure in the tires?

Maintaining the right air pressure in your car’s tires is vital. Your tires can lose 50% of their pressure without appearing flat, but they will wear poorly. Low tire pressure creates excessive wear on the edges of your tires, and...

Q: Bad muffler sound that gets better after a few miles

If the engine was sputtering and then when the exhaust starts to come off it makes the engine run better, then there is either a plugged muffler or a plugged catalytic converter. To check this, put the exhaust back together...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.