Q: Q: How do I buckle a seat belt?

asked by on

How do I buckle a seat belt?

Before driving your vehicle, you should always buckle the seat belt. To do so, pull the latch out of the belt retractor, and slowly pull the belt across your body. Insert the latch into the buckle, until you hear a click, then remove any slack from the seat belt.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I buckle a seat belt?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: The seat belts are locked.

The best thing to do is call your insurance company to direct you. Make sure you get the accident reported or they will not cover the accident. The problem is inside the seat belt retractors lock mechanism is designed to...

Q: Q: How do I use the cruise control?

The cruise control feature allows you to drive at a constant speed, without using the accelerator. This is ideal for long drives on interstates, or other relatively straight roads. Turning on the cruise control is very easy: Locate the...

Q: What does the Shift to Park message mean?

The Shift to Park message can appear on the driver information center (DIC). The DIC displays this alert when you need to shift the transmission into P (Park). This message will occur if you try to remove the key from...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.