Q: How do I adjust the Fader and Balance features?

asked by on January 04, 2016

How do I adjust the Fader and Balance features?

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I adjust the volume of the sound system?
To adjust the volume of your sound system, use the Volume knob. Rotate this knob clockwise to increase the volume, or counterclockwise to decrease the volume.
Parking pinion in transmission broke
With the parking brake not engaging, caution should be observed. This vehicle has the parking pinion inside of the transmission and the transmission will need to be partially disassembled to fix this. A qualified technician will be able to diagnose...
I have a 2011 Ford Fusion that has a tap/knock while idling. Normal for this motor?
Hi there. Typically this is normal for this engine. The design of the valve train causes this engine to make more noise than a lot of engines, but it does not create any issues. The fuel injectors tend to also...
What is difference between ticking and knocking?
Hey there. The engine knocking is caused by colliding flame fronts in the combustion chamber. Knocking does not stem from any mechanical fault but rather is caused by cylinder carbon deposits, low octane fuel, incorrect spark plugs, wrong engine timing...
I am missing one lug nut 4 out of 5
The threads are not in the rotor itself, the threads are in the hub that the rotor rides on. But you're right that you can do the job more efficiently when you work on the brakes. The rotor has to...
Rough idle and stalling with exhaust popping
The first thing to do is to get rid of the oil type air filter. This oil bath type filter can cause the mass air flow to be contaminated with the oil from the filter you are using. You should...
Very Loud Strong Vibration when transmission is engaged.
Hi there. What seems to happen is the input shaft on the transmission was not turning and the transmission was lockup internally. This caused your engine to raise high up and make the engine fully extend the engine mounts. When...
Exhaust
The first thing you should have checked is the new muffler and exhaust to see if the exhaust is hitting a body part or a heat shield. This is very common in aftermarket exhaust repairs. I would recommend going back...
2001 Chevy Silverado changed transmission fluid and filter now it will shift but won't move even in neutral
Hey Jack. Thanks for contacting us today. It's quite possible that the root issue is something very simple, like a shift solenoid not correctly attached or installed. It's also possible if the fluid was flushed, that a few inner seals...

Related articles

A Buyer’s Guide to the 2012 Ford F-150
The The best-selling pickup truck in the US for over 30 years, the Ford F-150 has a lot to offer in reliability, durability, and the features that buyers want in a truck. The 2012 F-150 is not only a tough...
A Buyer’s Guide to the 2012 Porsche Panamera Hybrid
Porsche Porsche is known for its prestige, power and performance, and its hybrid introduction to the Panamera line does not disappoint. While its hatchback design may put some off, the interior is nothing short of spectacular with well-appointed materials that...
2012 Toyota Tundra vs. 2012 Chevrolet Silverado: Which One Should I Buy?
Large work trucks are meant for one thing: work! These vehicles are rough and ready, and can handle nearly anything you throw at them, with the exception of a car pool. While they offer two or four door options, you...