Q: Q: High fuel consumption

asked by on

My Civic Vti Oriel Prosmetic 2006 gives 6km/L in city and 9 km/L on long route. The engine is D16W9. What shall i do to enhance its mileage and consumption ??
My car has an automatic transmission.

There are a number of things that can cause poor fuel mileage. A faulty camshaft position sensor is one of them. The camshaft position sensor is a magnetic sensor that monitors camshaft speed to regulate ignition timing and fuel injection timing. It gathers and sends information about the car’s camshaft speed (and as a result the position of each piston) to the car’s electronic control module. This information is received by the computer, which then uses this data to further calculate the time of ignition and the timing of fuel injection required by the engine. When this is not working properly, you may experience a drop in power, poor idling, poor fuel mileage and problems starting the vehicle.

A clogged or dirty EGR valve may also cause poor fuel mileage. The EGR valve is a small component designed to allow the flow of exhaust gases into the intake manifold in controlled amounts. Whenever you start the engine, the valve comes alive and waits in a closed position, blocking the flow of exhaust gases. Once the engine reaches operating temperature and speed increases, the valve, either through vacuum or electronic control will gradually open, allowing burned exhaust gases to enter and combine with the air-fuel mixture inside the combustion chamber. When the EGR valve is clogged or dirty, as they are prone to, it may not function properly causing the engine to idle rough, stall at idle speeds, cause the car to get poor fuel mileage, or emit a strong smell of fuel due to excess hydrocarbons which also results in failing emissions tests.

A clogged or failing catalytic converter can cause the vehicle to have poor fuel economy. As you may already know, the catalytic converter converts toxic exhaust gases into less harmful pollutants that are suitable to be expelled into the atmosphere. When this is clogged, this causes these gases to be backed up into the exhaust system not allowing the engine to breathe properly. When this happens, the engine is forced to work much harder to expel these gases. This often results in the engine bogging down, hesitating, shaking and causing very poor fuel economy. I would recommend having a professional from YourMechanic come to your location to diagnose and inspect your vehicle.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: High fuel consumption

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Rough idle on cold starts

When the engine is cold, the engine coolant temperature sensor must be working properly to signal the PCM to enrich the mixture on cold start. If there is a fault with that sensor, you can experience rough idle idle as...

Q: Cylinder 2 misfire P0302

You will need to first verify spark from the coil. If you have spark the replace the spark plug or test the one in there to see if it sparks. If plug is firing then you have to check the...

Q: Clunking noise when turning or going over bumps.

What you are describing sounds like a failing CV joint. A CV (Constant Velocity) joint is a shaft that connects the transmission to the wheels, essentially transferring the power from the drive train directly to the wheels. The CV joint...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.