Q: Headlights stay on

asked by on

The headlights won't turn off. I replaced the DRL fuse.

Hello. This sounds like the headlight switch is faulty. You might also want to check to make sure you have the headlight switch in either the auto position, or the off position. If the headlight switch is left in the on position, they will be on all the time. I suggest you have a certified technician, like one from YourMechanic, check your headlight system, and advise you of any necessary repairs.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Headlights stay on

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Turn signals and hazards don't work 2005 Pontiac Grand Am

Hello - the problem you are experiencing is a failure of the turn signal/hazard warning flasher unit. The flasher unit performs the flash function for both your turn signals, and the emergency hazard flasher function. I recommend a turn signal/hazard...

Q: Broken coolant hose

A broken coolant hose is always bad news as the vehicle cooling system cannot operate when the coolant level is low. If the broken portion of the hose was attached to a major component, it is likely the entire hose...

Q: Turn signals stopped working

Hi, the turn signal fuse is number 10 if you would like to take a look, however, this also controls a few other lamps. So if they are working we can rule out the fuse. Other DeVille owners have reported...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...