Skip the auto shop - Our mechanics make house calls

Q: Glove box stuck closed.

asked by on

My glove box is stuck.

I would take that car to the dealer and have them open the glove box. Whatever you do do not force it because it can damage the glove box and may cost around $600. It is common that the manual and other material has jammed the glove box closed. I read that the dealer has a fix for this problem.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How much to replace intake manifold gasket on a VW CC 2009?

sent to CS

Q: Oil fouls one spark plug - possible cause and recommendations to repair.

Hi there. If oil is causing the spark plug on cylinder number 4 to foul out every 600 to 700 miles, then the valve guide seals to that cylinder are damaged and need replaced. The valve guide seals prevent excessive...

Q: Apple Play

While this is something we at Your Mechanic may not get involved with, I did a little research. I have a 2015 Hyundai Sonata Sport 2.0T Limited. It came with Android Auto already installed while the 2016 models have both...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...