Q: Getting Engine light code P144C

asked by on

I am getting and Engine light code P144C. I think I need to replace the EVAP check valve.

The most common cause to this code is a fuel cap that is lose or not sealing. I would check the fuel cap to see if its lose or replace the cap altogether to see if that code will go away. If the code remains, it could be the EVAP check valve at the fuel tank that is stuck open or closed and needs to be replaced.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Getting Engine light code P144C

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My car has a mass air flow circuit range issue

Hello. P0101 is the trouble code for an issue with the MAF sensor circuit range. This code is set when the computer detects an issue with the vehicle's MAF sensor signal. If the MAF sensor has been replaced, then it...

Q: Engine smoked and had unpleasant odor

Many different things can cause a bang noise and smoke to come from the engine. The most likely issue would be an oil leak, low oil level, engine mechanical issue, or a faulty water pump. The Check Engine Light will...

Q: Loss of power and jerking when accelerating

Hello and thank you for contacting YourMechanic. This sounds like the turbo shift broke and the turbo quit working. To test the turbo, put the vehicle in an open area and set the parking brake. Step on the service brake...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.