Q: Q: Fuel pressure regulator

asked by on

Where is the fuel pressure regulator on 98 dodge dakota 3.9 6 cylinder

The fuel pressure regulator is part of the fuel filter and if after checking the fuel pressures you find the pressure is too high or low then it is recommended to replace the fuel filter and regulator with a new fuel pump since the filter is mounted on top of the fuel pump in the fuel tank.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Fuel pressure regulator

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car won't start - 1998 Dodge Durango

The starting troubles you are having are likely related to your battery or your starter. You will want to start by jump starting the vehicle. If this works, the battery was drained. The battery then may just need a good...

Q: 210 gas mileage on a Nissan Maxima with a full tank of gas

Yes, change the fuel filter anyway. It's so old so you might as well. But that gas mileage is pretty much normal for Maximas. Those have V6 engines that are very powerful. Most people drive them reasonably fast. The faster...

Q: My truck runs rough/stalls when I turn at low speed and low rpm.

Hi there. In most cases, this will occur due to an obstruction of fuel or the inability to correctly mix the right ratio of fuel to oxygen. This could be due to dirty or clogged fuel injectors, throttle body or...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...