Q: Exhaust manifold

asked by on October 11, 2017

On my manifold there is 2 bolts in it but there are not 2 on the other side, I heard some manifolds don’t have bolts on them at the end does this make any sense. Shouldn’t I have 4 not 2

You may have broken bolts or studs in the engine head that would cause an exhaust leak. You may need to remove the manifold and extract the broken off bolts from the cylinder head by drilling them out and using an extractor or tapping a new hole.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Hi I have this manual transmission car and it very hard to move the stick shift from right to left and left to right I check but nothing seem to be on the way

Water leaking from pillar sunroof drain into passenger footwell

Yes, diagnosing the leak and implementing the required repairs is no problem and is a fully covered service. To request that service, you can schedule via YourMechanic's leak diagnostic service page. If the drain tube is readily accessible, I can't...

how would you summarize "how does a cable work?"

Hi...if you would please review YourMechanic's introduction to clutch cables you will find the desired explanation. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

Any DIY service manuals available? 2007 Mercedes S550

Hello - except for the Mercedes factory Service Manual/DVDs, the usual sources of quality aftermarket service manuals (i.e. Bentley) are bare on this one. Haynes/Chiltons don't yet cover anything this new either, certainly not for S-class models. Your best bet...

Why doesn't car start after running out of gas girlfriend ran gas out of car now won't start plenty of gas in tank doesn't sound l

Fuel pumps rely on liquid gasoline for cooling. Consequently, it is recommended to keep the fuel tank at least 1/4 full to prevent the fuel pump from overheating. If the pump is run to the point of being dry, the...

Check engine light

Hi there, thanks for your question. I'd be happy to help. A [misfire can be caused by a variety of things other than bad spark plugs such as bad plug wires, vacuum leak, dirty fuel injectors, a weak fuel pump...

Key stuck in ignition; removed fuse to turn car off

You should have the ignition switch and the passenger seat module replaced in order to keep your vehicle operating safely. The problem with the seat module seems to be very common across for the 2009 Saturn Sky, I would look...

Do I need a special tool to change the rear brakes on a 2004 Cadillac Deville?

The only special tool that is really needed is a caliper piston return tool. You can watch a good YouTube video on this here. This tool comes in several forms and most are available for rent from your local parts...

Automatic won't shift

It sounds like your shifter cable may have come loose. What happens over time the bushing for the the shifter cable that connects to the linkage on the transmission becomes worn and needs replacing because it will not stay connected....

Related articles

Why Do Diesel Vehicles Emit Black Smoke?
There’s There’s a common misconception among drivers of gasoline engine cars that diesel engines are “dirty,” and that black smoke is emitted from all of them. That’s actually not the case. Take a look at any well-maintained diesel car, and...
How Long Does an Exhaust Manifold Gasket Last?
Your Your exhaust manifold requires a seal between the cylinder head and the exhaust manifold. This seal is called the exhaust manifold gasket, and is an incredibly hard-working part. The exhaust manifold is where all the engine cylinders’ burned gasses...
How Long Does an Exhaust Clamp Last?
When When examining your vehicle's exhaust system, it's normal to find that each of the pipes involved have been welded together. However, sometimes you may find that an exhaust clamp has been used, which is even more common when an...