Q: Q: Engine shield hanging off

asked by on

The engine shield on the bottom of my car is half falling off.

The cover gets torn off by parking stops, and hitting road debris. A technician would need to inspect it to see if it can be reattached, or if it needs to be replaced. I recommend having a mechanic, such as one from YourMechanic, check this out for you to identify and quote the repairs needed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Engine shield hanging off

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: CVT stop and go issue

Hi Wolton. Thanks for contacting us today. In most cases, the issues with CVT transmissions is related to damaged inner seals due in large part, to excessive heat build-up - which is why your symptoms appear in heavy traffic or...

Q: Q: Loud noise when accelerating

A flex pipe is designed into the exhaust system to allow movement between the exhaust and the motor. Over time, the flex pipe can rust out and break. Bad motor mounts can also allow excessive movement between the exhaust system...

Q: Accelerating doesn't produce increase in RPM

The throttle opening is controlled by the engine computer and if the computer sees a problem in the system it will limit the throttle opening. You need to have the computer tested to see the codes that can cause this....

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.