Q: Driver's seat not working properly.

asked by on

The driver's seat on my cadillac will not roll back.

The switch on this seat is a multi-position switch and would need to be tested to see if it is sending power to the roll back motor. Depending on availability, the seat bottom is not serviceable and would need to be replaced as an assembly. I recommend getting a qualified technician to check the switch for proper output and repair as required.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Driver's seat not working properly.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Battery is dying, jump start did not work - 2013 Cadillac XTS

To find a way to decrease the delay for the lights, consult the owner's manual for the specific steps to change the delay. Otherwise, there may be a faulted circuit allowing a component to stay powered up with the ignition...

Q: Got into a fender bender, now my car is leaking a lot of red-ish fluid from under my passenger headlight.

The car is not safe to drive with the fluid leaking. It is most likely the transmission line leaking and driving it will damage the transmission. Have the vehicle towed to body shop.

Q: Pinging sound a

Hey there, thanks for writing in about your 2012 Cadillac Escalade. A pinging noise is typically used to refer to spark knock or a damaged engine running condition. Did the Check Engine Light return with the same codes after doing...

Related articles

How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.