Q: Wheel bearing replacement for pressed in wheel bearing

asked by on August 09, 2017

can you replace right front wheel bearing that is pressed in

My car has 190000 miles.
My car has an automatic transmission.

Wheel Bearings Replacement $94.60 - $567.42 Get a Quote

Yes, you can replace a wheel bearing that is pressed in, however this usually requires a hydraulic press n order to remove and replace the bearing. Alternatively, you may remove the hub and take it to a machine shop or another mechanic to have them remove it. If not done properly, this can damage the housing that the bearing is pressed into.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Hi I keep hearing these knocking sound and vibrations from underneath the vehicle when accelerating, I've changed the drive shaft like twice now but still experiencing the same problems. Please I need solutions!

I changed my wheelhub about three month’s ago due to humming sound and now when I drive over 50 and apply my brakes my tire bounc

You should jack up that wheel and wiggle the wheel to see if there is a loose bearing? If it is not loose then you most likely have a warped brake rotor on that side.

Ticking from inside like card in bike spokes

If it sound like its coming from somewhere in the dashboard, you might have a leaf or some other small piece of trash in your ventilation fan. try turning the fan speed up and see if the sound changes. Turning...

Tire is stuck on the truck, I can't change my tire because the tire won't come off

Hi, thanks for writing in. The rim has a centering part that will cause it to stick to the hub sometimes after being on the truck for a long time. You will need to remove lug nuts and after making...

While driving my battery light came on and off, and as I made a stop to make a left turn. What does this mean?

Hi, thanks for writing in. The most common parts that involve this issue are the battery and the alternator. The starting/charging system should be checked to see if the battery is going bad and getting weak. It can then put...

Tension strut replacement

Hello there, one of the commonly replaced parts on the 2009 BMW 535i is the hydraulic fluid filled bushings. These suspension components wear over time from absorbing the road shock. When the fluid filled bushings leak, it is important to...

Car keeps stalling after changing TPS and solenoid

There are several possibilities as to why your Dodge Intrepid is stalling after giving the pedal a push. The two most common causes are lack of fuel pressure and/or worn out spark plugs. It is also possible that the camshaft...

Related articles

2012 Kia Optima vs. 2012 Nissan Altima: Which One Should I Buy?
Mid-size sedans can be pretty basic, with four doors and simple and straightforward options, decent but not stellar gas mileage, and an uninspired interior. They can also have great design and fight off boredom through sporty suspension and exciting technology...
The Best Used Cars to Buy For Fuel Economy
Saving money on gas is an important factor to consider when buying a car. The Honda Civic, Toyota Prius, and Ford Fusion all have great fuel economy.
The Top 5 Selling Cars in Florida in 2012
Florida Florida offers great weather year round, and the fact that snow and ice never factor into the equation means drivers don’t have to focus on the overall vehicle handling as they do in other states. The best selling cars...