Q: Drive belt broke what cause that problem

If you’ve never used blind spot mirrors (https://www.yourmechanic.com/article/how-to-use-blind-spot-mirrors) on a vehicle you’ve driven, they can be a bit disorienting while getting used to them. The convex shape provides a wider field of view and shows objects, cars, and curbs you...

A cooling system pressure test should be performed to show the actual area of the issue. The water pump gasket, thermostat housing gasket, coolant hoses, radiator, heater hoses, or even the greater core could be the cause of the leak....

There are several possible possibilities, as these are kind of noisy cars. Failed strut mounts and bearings are a common source of noise when turning. Wheel bearings (https://www.yourmechanic.com/services/wheel-bearings-replacement) also make noise while turning when they fail as well. It's also...

This can happen for a number of reasons, however, the smoking and liquid leaking is a sign that your car has overheated. This can happen when the thermostat (https://www.yourmechanic.com/services/thermostat-replacement) is not working properly or the coolant fans are not coming...

Hello. It is possible that your blend door actuator has failed. This is the part that controls your blend door. The blend door is responsible for blocking off the heater core when your A/C is on to prevent the hot...

If the fluid level is low, or there are other faults such as a loose power steering pump drive belt, you might experience that effect, that is jerking and/or lack of smoothness in the steering feedback that you feel when...

What you are describing sounds like a dirty or failing idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds...

Hi there - possibly. While it is possible that the wheel bearing was not damaged, or damaged enough to cause a concern for replacement. However, most modern front-wheel drive vehicles utilize double-row ball bearing hub designs, and these bearings are...

The bolt size that you need is 10 mm and the treads of 20 metric with a torque of 71 inch pounds. The best thing to do is take a thread gauge tool and check to see if the treads...