Okay I replaced water pump on my 2008 2.7 dodge charger a...


Okay I replaced water pump on my 2008 2.7 dodge charger and now I can't turn my cam 180 degrees. I put my timing chain on wrong and don't know how to fix it Mechanic's Assistant: Has the vehicle ever overheated? And when w...

Okay I replaced water pump on my 2008 2.7 dodge charger and now I can't turn my cam 180 degrees. I put my timing chain on wrong and don't know how to fix it Mechanic's Assistant: Has the vehicle ever overheated? And when was it last serviced? Yes it over heated but it still drove fine. Mechanic's Assistant: Are you fixing your Charger yourself? What have you tried so far? I've never put a timing chain in my life so I don't think I did it correctly Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No except I am not a mechanic

Automotive Expert
Hello, I am Randall. Welcome to Just Answer. I am sorry you are having this issue and I will do my best to try and help. You may receive popups about a phone call. The system sends them and I do not do calls. I will reply in chat shortly after reviewing your question. I will return shortly.Please bear with me a couple minutes, Thanks

Thank you
Automotive Expert
Do you have install repair instructions? I can send them shortly if need. Did you start engine or try to?

I need the instructions and no I didn't try to start car. I turned cam with hand after putting timing chain back on
Automotive Expert
Ok , bear with me a few minutes to send information

It didn't turn the whole 180 degrees ,it was blocked by something
Automotive Expert
I fully understand, please bear with me, thanks

Oh I'm fine thank you for helping me.
Automotive Expert
This engine is an "Interference" engine meaning, if chain on wrong or breaks when running? the pistons will hit valves and bend them. You did not crank it so good there, In order to move cams etc? you will have to turn the crank some... then cam ...then crank... then cam, The camp /valves is hitting the piston. Hard to explain.I have attached a file link to your page with install instructions. If using a phone? you may have to open the file from your email. Its a .pdf file , the only way for me to send, It will show how to install the chain I hope this has helped. I do the best I can working remotely. If you have any followup to this question? I am on/off each day and will reply as soon as I am back online. Otherwise. nice speaking with you and hope you have a wonderful day

What others are asking

How do I change the keyless lock acknowledgement?
Your vehicle has a system for confirming when you have locked or unlocked your vehicle with the keyless remote. When the Lock or UNLock button is pressed once, the car’s exterior head lights will flash to confirm the action. When...
Ignition switch not working.
The ignition lock cylinder is very common to fail and will move around where the key goes in. The lock cylinder is a simple fix with a replacement lock cylinder. You will have two separate keys unless a locksmith recuts...
Car leaking fluid.
A fluid leak from somewhere on your vehicle could be something normal like water condensation from your AC. Identifying an approximate location of the leak, and the type of fluid, would help in a diagnosis of your leak. A black...
AC and fan not working
The information provided for your Mazda leads me to believe that the blower motor may be the primary concern as to why your car’s AC and fan are not working. If you try all the settings of your fan and...
cracked engine block
I do not think it is a cracked engine block, but a blown out freeze plug in the block or heads. Have a pressure test done on the cooling system to see where the leak is in the cooling system....
Broken belts oil leak
This vehicle uses only one belt and an automatic tensioner. You didn't say what engine you have, but the V8 engines are known for having problems with the harmonic balancer (https://www.yourmechanic.com/services/crankshaft-harmonic-balancer-replacement) coming loose or falling apart. This could be one...
Incorrect spark plug replacement caused worse gas mileage
Hello there, thank you for asking about your 1997 Oldsmobile LSS. AC Delco 41101 comes standard on these vehicles and must be used in order to maintain the ignition system properly. Also, find a maintenance schedule for the vehicle and...
Windshield wipers are not working
Hi and thanks for your question. It is notorious for the wiper blade arms to strip out on the wiper motor drive rod. Check to see if the motor is turning the drive rod. If the drive rod is moving,...
I have a 2006volkswagen passat and was told that i needed my high pressure regulator pump replaced cause my car was not accelerati
If your vehicle's Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection), as well as Electronic Power Control - EPC - light (https://www.yourmechanic.com/article/what-does-the-epc-warning-light-mean-by-spencer-cates) are on, you should request a diagnostic to have the stored Trouble Codes read and evaluated. Diagnostics that follow up on the...