Skip the auto shop - Our mechanics make house calls

Q: How do I change the keyless lock acknowledgement?

asked by on

How do I change the keyless lock acknowledgement?

A: Your vehicle has a system for confirming wh...

Your vehicle has a system for confirming when you have locked or unlocked your vehicle with the keyless remote. When the Lock or UNLock button is pressed once, the car’s exterior head lights will flash to confirm the action. When the Lock button is pressed a second time, the horn will honk as added confirmation. You can turn the acknowledgment feature on or off with just a few steps: 1. Turn the ignition to On, while making sure the vehicle is completely stopped. 2. Press the Menu button. 3. Use the +/- buttons to highlight Customize Settings, then press Source. 4. Use the +/- buttons to highlight Door Setup, then press Source. 5. Use the +/- buttons to highlight Keyless Lock Acknowledgment, then press Source. 6. Use the +/- buttons to choose between On and Off, then press Source.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: How do I use the autostore stations?

The autostore system searches for the radio stations with the strongest signal, and stores the top six so that you can easily access them. Using the autostore system is very easy: Set the radio to FM or AM by...

Q: Fuel or computer issue

Hey there. The problem could be a fuel-related problem but In my experience these vehicles have problems with the distributor ignition can cause loss of power. The vehicle's computer should be scanned for trouble codes and any irregular data and...

Q: How do I set the clock without the multi-information display?

If your vehicle does not have the multi-information display, follow these steps to set the clolck: 1. Turn the ignition to On. 2. Press the Setup button until it reads Adjust Hour. 3. Rotate the selector knob to change the...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...