Q: Code P1754

asked by on February 08, 2016

I am getting code P1754 input clutch solenoid valve circuit malfunction.

When you get this code on your vehicle it can be the first sign of an internal transmission failure. I would check the transmission fluid first. If it is really dark or dirty then there is an internal failure. If the fluid looks fine then the problem is commonly in the valve body and replacement of the transmission valve body will be needed.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

Brake lines have air, bled many times

Hello. Moisture in the brake fluid is being boiled off as steam when your brake system temperature gets above 212 degrees (at sea level). The steam re-condenses as water in the system BUT air pockets can be created and remain...

Car dies after warming up restarts right after then dies shortly after

The first thing to check for is air leaks. Any air that gets into the engine without passing through the Mass Air Flow meter (MAF) will dilute the fuel mixture and lead to just this kind of behavior. At your...

Complications with a used car

Hi there. I would recommend having the battery tested first thing. It feels like the ECM is not getting enough power from the battery and probably needs replacing. I recommend having a technician come out and inspect the battery, test...

Front tire locking up

A locking front wheel can be catastrophic in many cases. Your vehicle may be experiencing failure in its ABS system. Also this can be a result of a ceased brake caliper. I would have a certified mechanic take a closer...

Car sputtering while idling.

There could be a number of issues that can cause this concern. If the issue only occurs after the engine has warmed up. A problem in the electronic throttle control actuator either in the motor or one of the sensors...

Noise after the car is turned off, car idles rough - 1973 Nissan 240Z

Hello. It sounds like the starter relay might be bad and is causing the starter to stay on, which is the clicking noise that you are hearing. There could also be a problem with the starter solenoid. The problem you...

While driving my car wasn’t accelerating pulled over then when I tried to start it again it just made a click/clunk noise

It sounds like you may have broke a timing belt. If you did then you may have bent the valves and caused major engine damage to the cylinder head due to bent valves. If the timing belt did not break...

How do I call back?

The call back feature allows you to dial the number that your phone most recently received as an incoming call. To use this feature, follow these steps: 1. Press the Phone Send button. 2. Following the tone, say “Call”. 3....

My car runs but says no key detected.

There is a problem with either the key fob or the electronic control system in the car. Occasionally, cell phone interference causes issues with the system leading to the "no key" warning light. With regard to the key fob, I...

Related articles

How to Replace a Vacuum Brake Booster Check Valve
Brakes are assisted by the vacuum brake booster check valve that fails when the brake pedal is hard to press, feels spongy, or does not work at all.
5 Commonly Overlooked Vehicle Maintenance Items
Brake fluid, auto transmission fluid, and coolant flushes, as well as cabin filter changes and valve adjustments, are all important services.
Understanding Nissan Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Nissan service indicator lights let you know when and what service your car needs.