Q: Car not starting because of alarm system

asked by on

My car won't start due to the alarm system.

There is a few issues related to the alarm system that could be causing the problem you are having and more information would be needed to diagnose the problem for you. The remote may be having an issue with the battery and not turning off the security system. The other issue may be the door switch not turning off the alarm, if key is used. I recommend you have a mechanic, like ones from YourMechanic, come by and check your car’s starting issue.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Car not starting because of alarm system

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car not starting after jumpstart

It sounds like your starter motor may have failed. I would recommend having your battery fully charged then load tested to ensure it functions properly. Once the battery is known to be good, have it reinstalled and try to start...

Q: I am having a chirp/squeak sound coming from my rear end

Hello, thanks for writing in. If the problem occurs as the wheels are spinning then it typically means that something is rubbing. Most of the time this comes from the braking system. It is common for the rear brakes to...

Q: I have a 2007 NissanMurano 169,000 miles. It is jerking while accelerating but no check engine light is on.

Hello, thank you for writing in. The first task to take on is finding out if the jerking is coming from the engine or wheels. Also keep in mind, even without a check engine light on, there may be a...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...