Q: Q: Car losing RPMs and stalling.

asked by on

The vehicle is stalling while driving. The RPM keeps dropping.

There are many variables that go into diagnosing a problem like this. To give you some ideas things like low fuel pressure, an ignition module failing, a clogged catalytic converter among many others can cause symptoms like you are describing. I suggest you seek the help of a professional mechanic to diagnose your problem correctly and get you back on the road.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Car losing RPMs and stalling.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I accidentally put in 10w30 oil instead of 5w20

I do not think it will cause a problem with your engine using the 10w30 oil if you added a quart until you can get the oil changed using correct 5w20 oil. It is better to add this oil than...

Q: Car turned off completely during highway driving

In order for an engine to continue running, it must have three things. These things are compression, fuel, and ignition. If one of those three things goes away, the engine will no longer run. I would recommend checking your...

Q: I have a 2012 KIA Forte LX. For the past year I have had a problem with the back wheel/s vibrating. What could be the problem?

If you have already had the wheel and tires replaced then you may have a bent spindle causing the wheel to wobble. Have the vehicle four wheel alignment done to see if the suspension is bent and then you will...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...