Car will not start after replacing the battery in an 04 [...
Responses
AutoDoc1
247 days ago
Hi and welcome to JustAnswer! You can ask unlimited questions to any of the 12,000 Experts! From doctors, lawyers, tech support, contractors, tutors, auto and boat mechanics, appliance technicians, veterinarians, accountants, appraisers, psychologists, engineers, heavy machinery masters, dream interpreters, and more, we've got you covered, 24/7.
My name is \*\*\*\*\* \*\*\*\*\* I will be able to assist you. I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out.
Thank you for taking the time to let us help you out with this problem and hopefully we can sort it out quickly.
Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to help solve your specific problem.
Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible.
First make sure your key fob has a good battery in it. Use the key fob remote to lock and unlock the doors. Turn the ignition on for 30 seconds and it should start. If it doesn't then lock and unlock the driver door with the physical key and turn the ignition on for 30 seconds. If it still doesn't start then there is a problem with the anti theft system and will require a scan tool to find the problem.
To determine what the problem is you will need to use a scan tool to read the trouble codes (if any are stored) and also to view the data in the antitheft module to see what inputs / outputs are being recognized by the module. This will determine whether you have a problem with the key, receiver, module, or any other part of the system. Since there are not any common problems for this issue, I can not recommend any specific repair for this fault. If the module has any trouble codes stored let me know what they are and I will be able to pinpoint a specific problem for this issue.
My goal is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. If I’m not online at the time, I will respond ASAP when I get back.
Customer
247 days ago
Ok thanks I will get back in touch
AutoDoc1
247 days ago
You're very welcome.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How Do Oil Filters Get Dirty?
Oil filters have a very important, yet really dirty job to perform. I don’t think even Mike Rowe (http://www.discovery.com/tv-shows/dirty-jobs/) would want to tackle the dirty job of an oil filter (https://www.yourmechanic.com/article/how-do-oil-filters-work). Before we talk about the oil filter, let’s talk...
How do I switch between my cell phone and Uconnect, and vice versa?
If your cell phone is paired to your Uconnect system, you can switch between your phone and the system without losing your phone call. That way, if you’re on your cell phone and get in your car, you can seamlessly...
Transmission broke
Hello, if is and automatic transmission, the fluid level should be checked first. If the fluid level is low, it should be topped up to the full mark and see if operation returns to normal. If the fluid level is...
My engine is burning oil, is it worth the fix?
Adding a quart of oil every 2000 miles is annoying, but it's within tolerance of what many manufacturers specify as "normal consumption." If you like the car, and aren't bothered by the A/C issue, I would say keep it and...
Issues with MAF sensor and P010B code
The vehicle's Engine Control Module (ECM) (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-engine-control-module-ecm) may need reprogramming, as to a technical bulletin ITB09-028 dated June 3, 2009. The reprogramming by the dealer will be needed to try and see if the code goes away, if not, further...
Serpentine belt broke, engine temperature higher than usual
Hi there, thanks for writing in about your 2008 Mercury Milan. You'll need to replace the broken serpentine belt (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement) after checking all the pulleys and tensioner to see if they were the cause of the broken belt. Then install...
My alternator was just replaced. Now it's whining and locking on me! Why?
Check the transmission output shaft housing and make sure that it is not cracked or damaged. The vehicle speed sensor (https://www.yourmechanic.com/services/speed-sensor-replacement) is located in the output shaft housing and controls the speedometer. If the housing is binding with the output...
After a tune up I got a misfire in cylinder 3.
The hissing sound may be an indication of a vacuum leak, which may be causing the hesitation and misfire. High idle speeds or in some cases rough idle, stalling and hissing sounds are common signs of a vacuum leak. When...
High idling 3000-4000 rpm after cleaning throttle body...even after warming .....relearn procedure not working nissan altima 2007
Hi Muhibur. Thanks for sending your question today. This could be either a vacuum leak or an issue with the ECU that is causing this high RPM issue. The only way to know for sure is to have a professional...
Browse other content
Cities
Services
Estimates
Car will not start after replacing the battery in an 04 [srx](/topics-srx/) Mechanic's Assistant: Have you checked the battery, particularly the terminal connections? Are they corroded? Also the anti theft light came on ...
Car will not start after replacing the battery in an 04 [srx](/topics-srx/) Mechanic's Assistant: Have you checked the battery, particularly the terminal connections? Are they corroded? Also the anti theft light came on Mechanic's Assistant: Are you fixing your SRX yourself? What have you tried so far? Yes I am fixing it myself. I haven't tried anything yet I was trying to get the anti theft light to go off. Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? It only makes a click sound when I try to start it