Skip the auto shop - Our mechanics make house calls

Q: Airbag light on

asked by on

The airbag light is on.

The airbag light indicates a malfunction in the system. The system is always monitored for faults. It could be the airbag itself, wiring, or the impact sensors. The system will need scanned to see what trouble code is set. If you need assistance, I would have a certified mechanic diagnose your Air Bag Light and come up with the necessary repairs.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Van door not unlocking or opening.

The rear door lock actuator can fail in two ways electrically or mechanically. If it fails electrically you will not hear the actuator try to operate when you try to lock/unlock the door. If it fails mechanically like the gear...

Q: Brakes

This may be due to a lack of brake fluid or potentially brake pads needing to be replaced. Your brake reservoir has a sensor in it that detects the brake fluid level and relays this to the computer. When the...

Q: I have a rear strut issue when I go on bumps can I replace it myself in an auto shop at school or do I need to bring it in to pros

I think that is something that you should be able to handle in your auto shop at school. I would ask your teacher first of course but I don't think he or she will have any issue with this type...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.