Q: Q: Air conditioning doesn't work

asked by on

The passenger's side air only blows warm air, while the driver's side is cool. Is this caused by a blender door issue?

Modern cars have complicated HVAC systems that are heavily controlled and monitored by the car. The most likely cause is a blend door or a temperature control door has failed. A qualified technician would be able to diagnose the issues with your air conditioning.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Air conditioning doesn't work

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Some lights don't work - 2011 Mitsubishi Outlander Sport

Hello. Using a VOM check for voltage at the bulb receptacle. You will probably find that the circuit is "dead" at that point. You then have to trace the circuit to find out where it is open. You might have...

Q: Jeep tries to start, but doesn't.

This sounds to me like the starter is cranking over very slowly. This can be due to the starter motor being weak and in need of replacement or the battery being weak and in need of a charge or replacement....

Q: The parking brake is locked up and the car will not move.

Hi there. The light that come on the dash when the parking brake pedal is applied and then shuts off when the parking brake pedal is released is a normal condition. The parking brake cable could be broken for the...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...