Skip the auto shop - Our mechanics make house calls

Q: Air conditioner not blowing cold

asked by on

My air conditioner is not blowing cold. I think I need some refrigerant.

The a/c on these vehicles have a few different things that can render the AC inoperative. The most common is the compressor failure. The compressor failure would require multiple parts to be replaced if it fails. I recommend you have a mechanic, like one from YourMechanic, inspect your vehicle’s AC system for you to see if a compressor failed or a less common failure has happened.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Air conditioner not blowing cold

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: valves

I think you are asking if a valve in a head will seal out all of the fluids and air? The answer is yes it should. A leaking valve will not hold compression if this was the case. The valve...

Q: Can removing A/C fuse stop the compressor working and breaking the metal parts?

The A/C compressor pulley will still rotate with the serpentine belt for the accessories but the compressor coil will not be energized to engage the A/C compressor clutch and no internal A/C compressor components will turn once you pull out...

Q: How can you tell if your alternator is working properly?

Hi, thanks for writing in. Usually this is identifiable by the charging system gauge in your car, which should typically read, at idle, 13.8 to 14.3 volts with no lights or accessories on (although some may charge at a slightly...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.