Q: Q: Overheating

asked by on

I have a 2011 335i with 50,000 the dash light comes on saying engine oil overheating pull over and I just had oil changed, could it be the coolant

Hi There, Overheating can be caused by a number of things such as low coolant levels, a faulty thermostat, a clogged radiator or a failing coolant fan switch. As you may know the coolant fan switch helps to maintain the proper coolant temperature by turning on and off at specific temperature thresholds. When this switch is not working properly, this can cause the fans to come on intermittently, all the time or sometimes not at all. When this happens you will notice a temperature spike and drop occasionally as the fan comes on and off. When your thermostat is not working properly or is stuck closed, this will not allow the coolant to properly circulate through the engine, which may cause the engine temperature to fluctuate erratically or in some cases just remain hot. You may also have a water pump that is beginning to fail. Water pumps often times will begin to produce a bit of a whining sound when they are starting to fail. A common problem also associated with this is the water pump may begin to leak around the water pump shaft due to the seal being damaged. In addition to leaking around the pump, you may have a leak elsewhere in the cooling system coming from one of the hoses going to or from the radiator. Lastly, you may have a failing cylinder head gasket allowing coolant to leak from the water passages into the cylinders resulting in the coolant being burnt in the combustion chamber with the fuel. If this is the case, you may also notice a bit of white smoke coming from your exhaust which is a product of the coolant being turned into a steam like vapor. I would suggest having an expert from Your Mechanic come to your home to diagnose your cooling system.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Overheating

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.