Popular questions

Question
I give my car gas, and it shuts down
Hi there. Are there any warning lights on? If there are any warning lights, this could lead us to the possible cause of your concern. However, low fuel pressure could be the cause. If there is not sufficient pressure in...
Question
Red fluid leaking from car
The transmission cooler and cooler lines are in the front of your car, and may have developed a leak. There are no common problems known, but red fluid could be your transmission fluid. You should not drive the car until...
Question
Car leaks coolant but not overheating
Engine coolant can leak externally through a hose, radiator, water pump, etc. or internally due to a leaking head gasket and sometimes a leaking intake manifold gasket depending on the engine design. External leaks are typically found by simple pressure...
Question
My key won't go inside the ignition
Hello there. What you're describing is typically an indicator of a broken ignition lock cylinder. The ignition lock cylinder is located inside the assembly or lock body that is often welded onto the steering column. Most of the time, when...
Question
2007 jeep liberty cracked radiator replace or use a fix kit?
Hi There, Unfortunately, there is no way to tell whether or not the fix kit will hold it and for how long. Depending on the severity of the crack and the location of the crack it may last for a...
Question
My car died and won't start what could the problem be?
Hello. A no start condition can be caused by many things. If you believe that the engine may not be getting fuel then I would start with examining the vehicle's fuel system. It may be possible that one of the...
Question
Brake caliper piston loose from fitting. Also leaking fluid from piston gasket on piston doesn't go all the way in when compressed
If the caliper is leaking, the most effective course is to disassemble it, inspect the bore, and re-assemble it with new seals. It is unlikely a leak will be resolved by any "external" measures. If you desire a resolution, please...
Question
Car sputtering.
You need to have the car checked for a fuel leak at the fuel filter and the fuel system. The fuel filter has been known to leak if the filter is not a factory replacement. An aftermarket filter man not...
Question
Accelerator is not responding
Your key battery should not have anything to do with the way the car runs once it is started. The problem you are experiencing when pressing the accelerator may be related to many different things, but could be related to...
Question
Exhaust manifold
Hello. Thank you for writing in. This procedure can be difficult to accomplish for several reasons. One, if you are not set up correctly, then you could be working against yourself. Make sure you have the exhaust manifold propped up...
Question
intake leak and sputters and dies
This could be a variety of issues causing the rough idling. The oil leak at the intake suggests you may have a blown head gasket. Has the car gotten abnormally hot? If so, this could explain the leak and would...
Question
One of the relays is clicking and draining the battery
There could be a parasitic draw involving the relay that is keeping it engaged. Lexus specifications for parasitic draw with the key off is approximately 50 milliamps. Anything over this amount indicates a parasitic draw. You could remove the fuses...
Question
43R-000711 1995 Jeep Cherokee
Hi there - if position 5 of your VIN is a "J", it is 4WD. If position 5 is a "T", it is 2WD.
Question
My fitting broke off in my manifold intake. What size thread tap do I need to clean out the threads?
As you know, there are a few different sizes of bolts that go into your intake manifold. Without specific detail as to the location of the bolt and what it is used for, this may be difficult to advise on...
Question
Screeching metal sound
The power steering fluid you keep adding has to be going somewhere and it most likely leaking from one or more places. Typically the power steering pump, high pressure line and power rack and pinion are common failure items. Have...
Question
Key, ignition and transmission issues, shifters
The most common cause of this could be: Neutral safety switch: a safety feature used to make sure the vehicle is in Park or Neutral before it can start or the key is able to be turned Ignition...
Question
Limp mode
If you do not use the recommended fluid for Chrysler or any transmissions in general, it can cause the transmission to have shifting and slipping concerns. Even damage can be caused from incorrect fluids being used. This is why I...
Question
1998 Nissan Cube (Japan) drive belt part number
The Nissan Cube was not sold in America until 2009. This model was a third generation compared to Japan's 1998 version which was the first generation. You may have to call the dealer or a local parts store to see...
Question
I've got a 2012 328i, twin turbo 4 banger. Tpms malfunction, says all four tires are flat but they're obviously not. Advice?
Hello. If the TPMS system is showing that all four tires are flat then they are either low in air pressure, or there is an issue with the TPMS system. I would first check the air pressure on all four...
Question
Dashoard lights on, loss of engine power
Hello. We will be happy to assist you with your 2010 Nissan Cube. The problem you are describing could be the result of a faulty alternator. The alternator supplies the proper amount of power to the ABS system, the VDC...
Question
Why does my 4 wheel drive, tract light, and engine check light come on all at once?
Hello. The Toyota dealership may be correct because the codes that you have listed are related to the charcoal canister. However further testing should be done to verify that the canister is at fault. The charcoal canister is part of...
Question
Car won't start - 1998 Pontiac Bonneville
Hi there. Disconnecting and re-connecting the battery, although the right thing to do while working on the fuel system, has tripped the security system and is not allowing a "start" sequence. (You don't mention it, but the security light in...
Question
My car is moving the Ac get cold if I stop the signal or park the Ac get hot
This is a classic symptom is very common. Most likely the cooling fan for the condenser is not turning on allowing the high side of the A/C system to get to hot. This reduces the cooling capacity of your system....
Question
How long does it take to replace the compressor bracket
Once the compressor is removed from the bracket, then there is only a couple of bolts that hold the bracket to the engine block. Make sure the compressor rear bracket is tightened or the new bracket will break. The bracket...