Q: Windshield wipers only go one speed

asked by on

My windshield wipers only work on one speed, or not at all.

The wiper high low relay, or fuse may be bad. I recommend having a mechanic, such as one from YourMechanic, inspect your windshield wipers, in order to identify and quote the repairs needed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Windshield wipers only go one speed

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I live in Wis. It was 7degrees. Drove on highway and my X5 was unstable like I had no traction at high speed. Tires good.

Your vehicle is equipped with wheel speed sensors at each of the four wheels which monitor wheel speed while relaying this information simultaneously to the ABS and traction control system which are controlled by the car's ECU. When the ECU...

Q: Car hard to steer after making noise

It sounds like you may have a bad water pump that caused the belt to come off. I would suggest having a technician come out and look at the car and inspect what caused the belt to come off and...

Q: My Tach doesn't read correctly sometimes. Power locks and wiper blades don't work all the time.

The problem with your tach sounds like it may be within the mechanical workings of the tachometer itself. If the gears that moves the needle around start to wear, you may have a bouncing needle or it can stop in...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...