Q: Why won't my push start honda accord shut off?

If your gas cap is loose, you will not lose fuel in its liquid form. You will, however, lose fuel in its gaseous state (https://www.yourmechanic.com/article/can-a-loose-gas-cap-let-gas-leak-out-of-the-fuel-tank) which is called a vapor. Gasoline absorbs heat and, if left in an open container,...

A knocking noise is never a good sign on an engine. If the sound appears once, then the engine is started and gets louder when you rev the engine then it may be a rod knock meaning that the engine...

If your manual says to change the oil (https://www.yourmechanic.com/article/when-should-i-change-my-oil) at 8000 miles then this is the official manufacturer recommendation. You have the choice to change the oil and filter sooner, but you will still need to monitor the oil level...

You will need to have the engine checked and scanned to access the trouble codes (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau). By doing this you'll be able to see if the engine camshaft variable valve timing actuator is working as intended. Make sure the oil...

If the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is on, that means that your vehicle's Powertrain Computer Module has detected an important malfunction. During a check engine light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) a certified professional from YourMechanic could download the Codes identifying the malfunctions...

Hello, the concern you have I strongly advise not to drive. The issue needs to be addressed, the vehicle will become inoperable. The automatic transmission has 3 systems; electronic, hydraulic, and mechanical. What describe could be an internal mechanical...

Hi There, What you are describing sounds like you may have a dirty or faulty idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) is a small valve on the engine's intake system that reads the air intake as...

What you are describing sounds like a wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement) that may be starting to fail. A wheel bearing will usually fail due to pitting or small damage on the surface of the rollers or the bearing race. Both the...

If you are running straight water in your cooling system then you are taking the chance the water will freeze in the motor and cause damage to the engine and cooling system.