Q: What does the setting menu operation Warning Light mean?

Check to make sure the shift cables are reinstalled correctly. Make sure when the clutch pedal is pushed that the clutch slave cylinder is pushing the shift fork correctly. If you still have issues then contact a qualified mechanic, such...

The Air Bag Light would set a code in the computer and should be checked by the dealer since you are still under factory warranty unless the stereo installer damaged the wiring or something to do with the airbag. I...

Hey there. The first thing I would check would be the fuel pressure. But there are several possible causes for this condition. There could be a vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak), the engine may need a tune up (https://www.yourmechanic.com/services/tune-up), or any number...

Hey there. This is one of the toughest decisions in starting a classic car restoration project (https://www.yourmechanic.com/article/-a-mechanic-s-guide-to-restoring-classic-cars-by-maddy-martin). Rust is relentless. The absolute "best way" to deal with rust (https://www.yourmechanic.com/article/how-to-protect-your-car-from-rust-by-cheryl-knight) is to disassemble the car, have it media blasted, or acid-dipped,...

Hi - you don't mention what software component of your vehicle needs updating (engine management, infortainment or navigation system, iDrive, etc.). In general, software updates need to be done by your BMW dealer or authorized service center with software update...

Hi there. It's possible that the shifting issue could be related to the clutch, but that seems more like a gear linkage issue. The engine vibration is most likely not related; and could be caused by a damaged vacuum line...

The issue could be the evaporative emission vent purge valve on the vapor charcoal canister. I recommend using a sniffer that is used for butane and check for a fuel leak around the vent purge valve and see if there...

If the headlights are working intermittently (i.e., turn off after you start the truck), there is a loose connection, faulty relay or switch, or other electrical problem in the headlight circuit. When the problem occurs, you can find the fault...

It sounds like this may be related to a couple of different possibilities. This could be a bad idler pulley bearing (https://www.yourmechanic.com/services/drive-belt-tensioner-replacement), which is a bearing inside an idler wheel that the serpentine belt rides on. When these bearings wear...