Q: What does check parking assist mean when I put it in reverse

asked by on

what does check parking assists means when i put it in reverse

My car has 119673 miles.
My car has an automatic transmission.

In most cases this means the sensors need to be cleaned. Have all the rear bumper and front bumper sensors cleaned and then try system again. If problem persists then have a mechanic like one from YourMechanic test the park assist for codes to see if one or more of the sensors have failed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. What does check parking assist mean when I put it in reverse

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Issues while shifting into park - 2011 Land Rover LR4

Hello. It sounds like the parking pawl inside the transmission might be failing. When an automatic transmission is put into park, it is mechanically shifted into neutral and the pawl will engage a gear connected to the output shaft of...

Q: Brakes spongy after booster and master cylinder replacement

Hello. You need to double check the installation since you may have put the brake booster rod on the brake pedal wrong causing binding of the brake switch and causing the system to not bleed correctly. Also make sure the...

Q: Parking brake is locked up.

The car can still be towed. Often, the metal wires cables that control the mechanical parking brake may rust in their insulation and that causes the cable to bind and seize. These systems can fail in both the released position...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.