Q: What causes the key fob to not work?

asked by on

What causes the key fob to not work?

The key fob will not work under the following circumstances: 1. The key fob battery is dead. 2. One or more of the doors is not properly closed. 3. A key is in the ignition. 4. The key fob is not within range of the vehicle (approximately 33 feet).

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. What causes the key fob to not work?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car key loose in the ignition

There is a common problem with the batteries on that car that will cause the engine not to crank. You need to have the battery load tested to see if it has enough cranking amps to crank the car. A...

Q: My car is not accelerating past 40 mph.

Hi there. Typically when the car will not accelerate past 40 MPH, it's due to either the vehicle being in a limp mode, or other mechanical (fuel or ignition system component) failures. The best way to determine the root source...

Q: Air conditioning and heating not working after accident

The front right side viewed from the driver seat is where the AC compressor is located. The front left side viewed from the driver seat is where the transmission is located. If all of a sudden the AC quit working...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...