Q: Trunk slams closed

asked by on

I just purchased a 2014 Infiniti Q50 and the trunk is very heavy and closes fast and hard unless it is all the way open. Once all the way open it stays in place, but from 3/4 to below that it slams shut. Is this normal?

My car has 28000 miles.
My car has an automatic transmission.

You have two hood support gas charged shock supports that when they are weak and low on charged gas will not support the trunk lid as it should. You need to replaced both sides.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Trunk slams closed

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Reprogram Engine Control Module Q50 Infinti

An ECU reflash or programming service is something that only an authorized dealership or Infinity repair facility can perform; due to security and proprietary issues. I would recommend contacting your local Infinity dealership to receive a price quote on this...

Q: Odd marks on rotors

Hello. This can happen for any number of reasons such as a small burr in the pad material or even a small piece of dirt or debris lodged in one of the rotors. If you are starting to notice changes...

Q: At 60k miles my 2014 Nissan Rogue is needing transmission maintenance, Its sounding like its winding up and the gear shift has loc

The transmission service should definitely be performed based on the age and mileage alone. The CVT transmission life will be greatly extended by maintaining it properly. Not being able to shift it from Park is a separate issue. Modern vehicles...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.