Q: Timing belt with water pump replacement? How much it is going to cost?

asked by on

Timing belt with water pump replacement? How much it is going to cost?

Billing question sent to CS for the replacement of the Timing Belt and the Water Pump.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Timing belt with water pump replacement? How much it is going to cost?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Fan pulley wobbles and makes some noise. On 03 Sequoia SR5. On side of road now!

The fan pulley is attached to the water pump and if you can move it up and down then the water pump is bad and needs replaced. Have a mechanic like one from YourMechanic check it to see what all...

Q: Jerking and high rpms

It may sound like a simple suggestion but I would recommend checking the transmission fluid level to be sure that it is within specification as a low transmission fluid level can also cause some of the issues you are experiencing....

Q: Check engine light and vsc track off light is on.

Hi there. The vsc track off light (traction control light) is on for the computer has turned off the traction control for something stopped working. Check the wheel speed sensors and the wiring to them. A dirty wheel speed sensor...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.