Q: Q: Radiator leak

asked by on

The radiator leaks.

Hello there! To verify if the radiator is in fact leaking, I would recommend that a well-trained technician performs a pressure test on the cooling system. Pressure testing the system will expose any coolant leaks in the system and make the repairs needed to have this issue resolved.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Radiator leak

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: if i wanted to remove the intake manifold because i have a vacuum leak; would i have to remove the fuel rail

You should first confirm the vacuum leak by carefully introducing propane (or equivalent) at the suspected leak site. If introducing propane at the leak site increases engine speed, then you have a vacuum leak. Perform the test outdoors and be...

Q: Q: Front end shaking.

The shakes can be the front wheel bearings loose and the front brake rotors warped. The vehicle front end has to be lifted and bearings checked. The rotors will only cause the shake when stoping. You will need to have...

Q: Top water hose gets hot with new thermostat

Hello. This is completely normal operation of the vehicle's cooling system. The top radiator hose should always be warmer than the bottom. As coolant flows through the water pockets in the engine it picks up heat, and it is then...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.