Q: Powertrain warning appeared on my Ford Mondeo.

asked by on

I have driven from Birmingham to Torquay today on business. Powertrain spanner warning appeared on dashboard tonight, need to get home tomorrow. Is the car safe to drive that distance, car driving OK at present

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Powertrain warning appeared on my Ford Mondeo.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Hi - I have the 2014 wildtrak. The powertrain light came on Friday after about 30 minutes of driving no more than 65km. It came of

The powertrain warning light is intended to alert you to a malfunction in engine controls, the transmission or traction control/ABS. If the problem resolves itself the warning light may turn off. For example, if you have a heavy load, perhaps...

Q: Coolant temperature gauge does not move at all. 1998 Ford Ranger

Hi there - most likely the coolant temperature sensor (for the gauge, not the coolant sensor that drives the fuel injection - there are usually two) is toast. This can be checked with an ohm meter. A reading of 2K...

Q: Engine light came on after washing engine 2 days later then went off and oil lamp came on three times - driving - went off.

Well, you have a couple of questions here and not a lot to go on, so I'll address them as best I can. Your Check Engine light indicates that a trouble code from a sensor has been registered in the...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.