Q: Overheating now car won’t start ?

Hello. Usually transmission popping noises are caused by issues with the transmission, however there are many possibilities. The first thing I would check, is to see if this vehicle has a dipstick that allows you to check the fluid. I...

Hello and thanks for contacting Your Mechanic. The code P0012 (https://www.yourmechanic.com/article/p0012-obd-ii-trouble-code-camshaft-position-a-timing-over-retarded-bank-1-by-jay-safford) means that the camshaft timing sensor is reading the camshaft is retarded. The code P0299 (https://www.yourmechanic.com/article/p0299-obd-ii-trouble-code-turbo-supercharger-underboost-condition-by-spencer-clayton) means that the turbo has excessive low output. Your turbo will not spool...

Hi there. From the description you have provided, the clutch not fully engaging, is not likely to be an air bubble in the hydraulic system. Had the clutch not fully disengaged (https://www.yourmechanic.com/services/clutch-is-not-fully-disengaging-inspection), would have led me to believe air in...

Hello. A popping / clunking noise when moving in reverse can be caused by many things. Two of the most common causes for those symptoms are worn axles or motor mounts. The axles are the joints that transmit power from...

Hi. That can be so frustrating to have your car stall when you expect it to go! It is usually caused by an interruption in the delivery of fuel or spark. Technicians use diagnostic tests depending on the symptoms to...

Hi There, Generally, the check engine light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) comes on when something fairly serious is going on with the vehicle. This can happen for many different reasons such as a faulty mass air flow sensor, a faulty O2 sensor, a...

It sounds like you did not put the clutch linkage back in place correctly. Without seeing the vehicle it would be hard to know what is causing the problem . I suggest having a mechanic like one from YourMechanic inspect...

There is no need to replace anything other than the drain plug and that part is sold separately. If, by chance, the internal threads in the oil pan are damaged, those can be restored. For your car, the drain plug...

Stalling when the vehicle is put in gear simply occurs if the engine cannot accommodate the load. Among the potential causes of that are faults in engine controls. A mechanic can test the throttle position sensor and idle control valve...