Q: Once car warms up won't go in gear

asked by on

After warm up Transmissions does not go in gear

My car has 150000 miles.
My car has an automatic transmission.

When the transmission fluid is colder it may be sealing good and as fluid warms the internal transmission leaks by internal seals. Have transmission pressure tested for internal leakage and may need overhaul.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Once car warms up won't go in gear

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Where is the starter located on a 2005 ford escape hybrid?

The starter is above the oil filter and opposite the A/C compressor (on the same "side" of the engine as the A/C compressor). The starter may be obscured by a splash shield that indeed must be removed to replace the...

Q: Fuel pressure drops

The fuel pressure is held up to the injectors by the fuel pump itself. The pump has a one way check ball built into it. The pump will hold the pressure up to the fuel pressure regulator and the regulator...

Q: The dash instrument cluster keeps dropping out.

Hi there. Check the ground wires to the instrument cluster and see if the wires are loose. A loose ground will cause the instrument panel to shut on and off all the time. Also, check the battery cables and make...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.