Skip the auto shop - Our mechanics make house calls

Q: Oil pan gasket and rack and pinion leaking

asked by on

My oil pan gasket is leaking, and my rack and pinion is leaking power steering fluid.

A: I would recommend having a knowledgable tec...

I would recommend having a knowledgable technician thoroughly inspect the vehicle to determine exactly where the leaks are coming from. A leaking pan gasket would require removal of the oil pan. A leaking rack and pinion will most likely require replacement of the entire rack, since most rack and pinion leaks usually happen internally.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Steering wheel vibrating at highway speeds

The suspension on the right side may have strut problems or bearing along with ball joints. If one or more items are bad then both sides and the rest of the suspension should be checked for problems. I recommend you...

Q: I step on the gas it feels like it is forced to accelerate and the rpm's shoot up. The obd 2 scanner reads po700.

The code P0700 is for the transmission having a problem. I would recommend checking to make sure the fluid is full and not pouring in any additives until the problem is diagnosed. If the fluid is full and it does...

Q: no power to fuel pump

Your fuel pump relay pin 86 is on the ground side of the relay and goes all the way to the ground on the rear of the engine. With the relay out you should be able to check socket 86...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.